Pentax frame sensor11/23/2023 However, we found the sensor surface to be slightly out of focus when compared to the LensPen loupe – and, annoyingly, there’s no focus adjustment. The wands have a tendency to simply move some particles across the sensor, rather than picking them up.Ī LED loupe is included in the kit, and it shines brightly into the camera chamber. You get 15 double-ended wands and a decent supply of streak-free fluid, but the results are mixed. Should this happen, you can always switch to the included cleaning swabs and solution. The SensorBulb blower puffs dust away, albeit in the same uncontrolled manner as any blower, meaning that dust can just be blown around and onto the sensor, not necessarily off it. ![]() You’ll also need a separate loupe to really see what you’re doing, as otherwise the cleaning procedure is more of a ‘press and hope’ affair.ĭelkin’s kit is equipped to remove loose particles and more stubborn contaminants. The Platinum is better at removing stubborn contaminants than a basic blower tool, but more stubborn marks and smears will remain, necessitating a wet clean to achieve perfect results. No residue is left on the sensor, but you can get a sticky outline if you rock or twist the pad while it’s in contact with the sensor – and this can only be removed with a wet clean. Dust-Aid claims that the Platinum can be used on all sensors, including coated sensors, and on cameras with a self-cleaning sensor mechanism. Simply press the pad onto one of the cleaning strips to remove any contaminants, then dab onto your sensor to pick up loose dirt and debris. It’s a simple device consisting of a wand with a silicone pad on the end, measuring roughly 10 x 15mm, plus 6 adhesive cleaning strips. The Dust-Aid Platinum will easily slip into a kit bag and comes with its own compact travel case. Its hinged tip ensures a good contact with the sensor, though it doesn’t attract debris quite as effectively as the similar Dust-Aid Platinum or SpeckGrabber tools on test. ![]() The included hurricane blower will dislodge loose particles, however simply blasting air in this fashion can result in dust from the surrounding chamber actually being blown onto the sensor.Ī better tactic is to use the included SensorKlear II cleaning pen. There’s also a very useful opening on the side so you can clean with the loupe in place.īut while you get a great view, cleaning performance is hardly out of this world. The loupe’s focus is adjustable to cover different sensor sizes, and it rests securely on the lens mount of your camera. Identifying any dust is a cinch, thanks to the SensorKlear Loupe with its LED illumination. This kit includes a range of gadgets for performing a dry sensor clean. LensPen proudly asserts that its cleaning equipment is used by NASA on the International Space Station – a bold claim, but we weren’t able to pop up there to check for ourselves. ![]() Neither included tool removes oil or stains
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |